The mV600 controllers have been engineered with a number of outstanding features to meet all of your process control needs. mV600 offer a multitude of possibilities from ON/OFF or proportional dosage to analog recorder output and alarm. A host of self-testing features and user-friendly functions make mV600 a great value.
The product is a real time microprocessor-based ORPcontroller. It provides accurate measurements, flexible ON/OFF or proportional control capabilities.
Large LCD with 4 ½ 17 mm digits and 3 ½ 10 mm digits.
In a system with poor grounding, it is possible to have a ground current flowing through the reference junction. This can cause a rapid degradation of the electrode. The Hanna differential input reduces the likelihood of ground loops.
Slows the pump down when the measured ORP level approaches the set value, which ensures precise dosage and avoids costly waste of chemicals due to overdosage.
To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a hard copy of the results on demand.
RS232C port allows for connection to a PC. Data transmission from the instrument to the PC is possible with the HI 92500 Windows® compatible application software offered by Hanna Instruments.
Hi-tech microprocessor puts a host of variables at your disposal to fine tune your process, save on chemicals and meet regulatory requirements.
calibration date andtime and the mV calibration points used
1 or 2 output relays for low conductivity or highconductivity dosage (COM, NO and NC contacts) and 1output relay for alarm condition (COM, NO and NC con-tacts)
Automatic 1 or 2 points at 0, 350 and 1900 mV.
ORP electrode with BNC connector.
Scala mV: ±2000 mV
Risoluzione mV: 1 mV
Accuratezza mV: ±2 mV
Calibrazione mV (ORP): automatic, two point, at 0 and 350 or 1900 mV
Scala Temperatura: -9.9 to 120°C
Risoluzione Temperatura: 0.1°C
Accuratezza Temperatura: ±0.5°C
Segnale Uscita Analogica: galvanically isolated: 0-1 mA, 0-20 mA and 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC
Segnale Uscita Digitale: RS232 bi-directional optoisolated
Consumo di Energia: 15 VA
Fusibile di protezione : 5A, 250V fast fuse
Frequenza Massima Oscillazione: 4 MHz
Dimensioni foro pannello: 140 x 140 mm
Alimentatore: 230 ±10% VAC , 50/60 Hz
Condizioni di Utilizzo: 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensioni: 144 x 144 x 170 mm
Peso: 1.6 kg (3.5 lb.)
Informazioni Ordine: Each mV 600 model is supplied complete with mounting brackets and instructions.
Inserisci i tuoi dettagli qui sotto per salvare il tuo carrello per dopo. Chissà, forse ti invieremo anche un dolce codice sconto :)
